Thermalight Skylight- Fixed Standard
Thermalight Flat Fixed Glass Rooflights
The Thermalight concept is based on an innovative design that delivers maximum daylight due to no internally visible framework. This low profile, high performance system is not prone to the 'water ponding' effect that rival glass products are prone to, due to it's intelligent use of flush external metalwork.
Thermalight units are suitable for both flat and pitched applications, they are available in many shapes and sizes and even come in a walk on variant.
The Thermalight system is supplied with a complete fixing kit which includes concise fitting instructions for installation by construction tradesmen or DIY enthusiasts.
Single flat fixed Thermalights have a limit of 5 square meters or a length of 4 meters, anything above these limits should be treated as a Multi Pane Thermalight.
Key Features:
- Low profile
- Simple installation
- No internally visible framework
- Bespoke sizes to order
- Safety glass to both panels
- High thermal performance
- Large spans available
- Easy clean and low maintenance
- Walk on specification
- Low E coating
The below table is a good guide of sizes available. Please note that we are able to manufacture to any specific dimensions within the minimum and maximum parameters shown in the table.
|
Technical Data
|
All sizes quoted are overall external weathered upstand sizes
|
|
Recommended minimum kerb height
|
150mm (to avoid invalidating roof guarantees).
|
|
Minimum kerb thickness
|
75mm
|
|
Recommended pitch on kerb
|
5 degrees
|
|
Minimum glass size
|
400 x 400mm (smaller can be made but it's no longer a means of obtaining effective daylight)
|
|
Standard glass
|
28mm DGU; 6mm toughened outer; 16mm black silicone sealed spacer; 6mm Low E coated toughened inner pane.
|
|
Maximum single pane glass kerb size
|
3300mm x 1500mm span @ up to 5 degrees kerb pitch |
|
Standard sizes (outside kerb sizes)
|
1000mm x 1000mm / 1000mm x 1500mm / 1000mm x 2000mm
|
Thermalight Fixed rooflights can be manufactured to most configurations.
For more information, please call our technical department on
01276 451555.
Documentation
- Critical Kerb Pitch [ PDF ] [ DWG ]
- Typical Kerb Detail [ PDF ] [ DWG ]
